Digital Model 10
The Digital Model 10 is designed as an integrated unit to make oxygen measurements. The standard version includes an electronic magnetic stirrer and the electronics to supply the polarising voltage, signal amplification, and digital display of percentage saturation for a single electrode. The only additional requirement is a supply of constant temperature water to the incubation chamber to ensure accurate readings.
Located on the front panel are controls to:
-
Operate and adjust the stirring speed;
-
Set the polarising voltage between 0-1V;
-
Zero the electronics and electrode output
-
Calibrate the electrode
​
At the rear a socket provides a 0-1V output suitable for a data logger, chart recorder, or other device
Specifications
A comparison chart for our range of controllers is also available
2.5kg
Meter Type
Meter Resolution
Polarising Voltage
Electrode Sockets
Output Sockets
Stirring
Power Supply
Size
Weight
Digital
0-1V
1 x BNC (0-1V)
AC 110-120V and AC 220-240v versions available
0.1% saturation
1 x DIN
120 to 1200 rpm
230mm (w) x 300mm (d) x 200mm (h)
Operating Manuals
These operating manuals are in PDF format.
Ordering Information
For a working Oxygen measurement system you will need a controller and an electrode. Rank Brothers offers a range of Perspex oxygen electrodes and glass oxygen electrodes suitable for use with this controller.
​
To request a quote please use the Contact Us page and reference the order codes of the items you require
Controller
Order Code
OXY018A
OXY020A
Description
Digital Model 10 (220/240 V)
Digital Model 10 (110/120 V)
Optional Accessories
Order Code
OXY036N
OXY036P
OXY037B
OXY036Z
OXY037A
Description
PicoLog 1216 data logger (16 channels, 12-bit resolution, USB)
Pico ADC-20 data logger (8 channels, 20-bit resolution, USB)
PicoLog 1012 data logger (12 channels, 10-bit resolution, USB)
Connecting lead (Digital Model 10 to PicoLog)
Connecting lead (Digital Model 10 to Pico ADC-20